This is a new fresh mixer for the Prelude sound cards!

NOTE! Even if you don't have a Prelude sound card you can
      still try out the mixer "in demo mode"! If you really
      like it and have another sound card I might add support
      for other sound cards too! I need developer info though..

It has alot of features:
~~~~~~~~~~~~~~~~~~~~~~~~
· Everything concerning audio can be controlled by arexx!
· Everything concerning audio can be controlled by userdefinable hotkeys!
· There are two different mixer GUIs, pick the one you like!
· The mixer can popup on hotkey or arexx event!
· The mixer can close again after a user definable delay!
· A very small, configurable and slick bevel can popup instead
  of the mixer on hotkey or arexx events!
· It also has all normal features of a mixer, like the ability
  to change the display name of a channel, hide channels you
  never use, reset the card on startup etc..
· And it uses MUI.


History
~~~~~~~
* NEW * Added a hotkey for the +3dB boost function which can't be
        set at startup for some reason.

* NEW * Updated the layout of the prefs window a bit.

* FIX * Fixed a hit when adjusting the edit-popwindow.

* FIX * Now closing the edit-popwindow when closing the prefs.

* NEW * Now defaultng to the vertical mixer window.

v1.1
~~~~
* Now you can set how many steps each volume should step
  when controlled via arexx or hotkey up/down events.

* Now you can get that nice popup also for the other
  channels, not just the master volume!

* Now it's possible to set what channel should be used for
  input when sampling.

* The IRQ size can be set.

* Now channels can be excluded from the master volume.

* The reset and update of the volume was not perfect on startup.

* The arexx command MUTE can now toggle mute/no mute on a channel.

* The mixer window doesn't close and open everytime you exit the
  prefs, only when relevant settings have been changed.

* Added a SAFEMODE/S startup switch which can be used if you
  get stuck and need manual control over every critical
  thing happening during startup, such as reset of the card,
  if MUI should use Single Mode, if commodities should be
  initiated etc.

* Fixed some enforcer hits caused when using the program
  in demo mode, without a prelude card.

v1.0
~~~~
* Initial release.


--
Other programs by Deniil 715! can be found on OnyxSoft homepage at:

 http://www.onyxsoft.se/

Feel free to mail me if you found bugs or have suggestions:
  daniel / onyxsoft se

NOTE: Please, NEVER publish my e-mail on a web page or similar
      unless spam-encrypted like above!

 PERMSSN    UID  GID    PACKED    SIZE  RATIO METHOD CRC     STAMP          NAME
---------- ----------- ------- ------- ------ ---------- ------------ -------------
[generic]                 1901    2807  67.7% -lh5- 139f Jan 29  2006 Onyx Prelude.info
[generic]                24041   83716  28.7% -lh5- 2a8b Aug  2 14:15 Onyx Prelude/OnyxPrelude
[generic]                 6750   21134  31.9% -lh5- 4af1 Aug  2 14:27 Onyx Prelude/OnyxPrelude.Guide
[generic]                 2301    2924  78.7% -lh5- 759d Dec  6  2003 Onyx Prelude/OnyxPrelude.Guide.info
[generic]                 1377    1846  74.6% -lh5- 5065 Dec  6  2003 Onyx Prelude/OnyxPrelude.info
[generic]                 1386    2810  49.3% -lh5- 164b Aug  2 14:28 Onyx Prelude/OnyxPrelude.Readme
[generic]                 1799    2764  65.1% -lh5- 6fb5 Dec  6  2003 Onyx Prelude/OnyxPrelude.Readme.info
---------- ----------- ------- ------- ------ ---------- ------------ -------------
 Total         7 files   39555  118001  33.5%            Aug  3 07:32